-
Special fast drying thinner for printing inks under the "PadPrint" system and made from isocyanates. These inks are used on porous and non-porous surfaces. (polyethylene, polystyrene among others). -
Cleaning solvent for rollers and printing blankets, which easily removes excesses and remains of inks and greases accumulated on these accessories of newspaper and magazine presses, as well as in printing equipment of other work centers dedicated to the graphic arts. -
This product has been formulated for removal and cleaning of accumulated oils and fats over all types of metallic or not surfaces, (in some sensitive plastics, it will be necessary to carry out a compatibility test, prior to a massive application). It is a product that is offered previously emulsified and ready for use directly. Its non-toxic nature and absence of materials that can cause irritation or dermatitis make it ideal cleaning aid in a wide field of applications. -
Solvent for inks, formulated in such a way that an adequate balance is reached between its power as a solvent, its evaporation rate, viscosity, and safe handling. Ideal solution for cleaning problems on equipment and accessories used for screen printing, pad printing and similar techniques used over mark dies, molds, bolts, dies, lingots, bearings, cutting tools etc. -
Product designed for fast, effective, and safe removal of a wide range of floor sealants and paints, made with acrylic, epoxy, polyurethane, polyacrylate resins, etc. -
This product is also called penetration remover, given its function of removing fine paint particles and sealers that remain in holes and dimples from substrates to be protected, as well as wax and grease residues left by other products. It is normally used to remove undesirable residues that have penetrated substrate and that must be removed before placing any coating, thus preventing them from interfering with adequate adhesion and successful permanence. -
Epoxy mortar, especially for floors that withstand heavy work. High resistance to abrasion, impact, and chemical products. Monolithic finishes of various textures and colors. -
Extraordinary remover of industrial coatings, with superior characteristics to those of previous one, in terms of effectiveness, speed and selectivity. Ideal product to remove practically any floor sealer or industrial paint. -
Epoxy covering system for floors; indicated for areas, subject to heavy loads and impacts, caused by heavy traffic and machinery operation. Similar finishes to those achieved with EPO SB-1040 but in this case, finish is totally crystalline. -
-
-
-
-
-
-
Powerful alkaline degreaser, water-based, effective against all types of vegetable and/or animal fats and oils, biodegradable product. Un excellent cleaning material for parts with soot deposits or charred material. It must not be used on surfaces of aluminum, magnesium, or its alloys.
Water-based degreaser, strongly alkaline in nature, ideal for deep cleaning of metal parts, floors and equipment covered with greases, oils, dirt, carbon, and other undesirable accumulations. Must not be used on surfaces of aluminum, magnesium, or its alloys.
Non-toxic, solvent-based degreaser shows a great solvent power against oils, lubricants, and greases. Useful in industry in general and in manufacture of household appliances, since its great solvent power and rapid evaporation, mean savings time, work, and money. Especially indicated for cleaning stainless steel surfaces.
Water-based alkaline degreaser, an effective auxiliary in chemical cleaning processes for metal parts, floors and, in general, surfaces with deposits of fats, oils, dirt, coal and any other unwanted accumulations.
Powerful cleanser that comes as a medium viscosity cream and contains, in addition to a blend of biodegradable surfactants and additives, a fine abrasive that helps to effectively remove layers of dirt, grease, oil, some paints, creosote, tar products, stickers, crayons and pencil marks etc.
Degreasing, concentrated and low foam cleaner, added with materials that make it ideal product to use with mechanical or manual scrubbing equipment, for cleaning floors and other areas or surfaces, where generation of foam becomes a problem to avoid. Biodegradable material.
Biodegradable, colorless and non-toxic, all-purpose degreasing cleaner that can be used in any general cleaning job.
All-purpose cleaning and degreasing foam
Multipurpose degreaser emulsifiable in water, ideal for treating difficult dirt deposits, on floors, walls, worktables, etc. Cleaner and degreaser that acts quickly and efficiently, leaving a soft citrus aroma.
Degreaser easily emulsifiable in water, formulated based on a mixture of solvents and surfactants, designed for the quick and effective removal of undesirable accumulations such as mechanical oils and greases, fuel oil residues, waxes, etc. deposited on workshop floors, motors, industrial machinery and any other place with that type of heavy accumulations.
Water emulsifiable degreaser and highly concentrated chemical cleaner, designed to remove undesirable accumulations of heavy fats, motor oil, waxes, and dirt. Especially indicated for cleaning automobiles. Its action is shown by penetrating layers or deposits of fats and oils, preparing them for easy removal, using only water.
Multipurpose degreaser for universal application, water based, and which achieves excellent results by removing all types of fats, oils, waxes, etc. Product biodegradable.
Synthetic lubricant, totally soluble in water, for stamping, cold forming, and other operations over steel and stainless-steel materials. Its special additives give it a high degree of lubricity, which results in a significant reduction in friction between metal surfaces under extreme pressure. 100% biodegradable product, easy to remove with water. Does not contain phosphorus, sulfur, phenols, silicones, chlorine, or oils.
Synthetic cutting fluid, non-toxic or irritating; Cools, lubricates, and protects tools and parts during operations of drilling, turning, roughing, polishing, deep etching, etc. Biodegradable product.
Semi-synthetic coolant, whose composition includes a series of synthetic components, in addition to mineral oils, which has allowed combining lubricating properties of these, with the desirable cooling and wetting properties of synthetic fluids. FRIOLUB is a controlled foam, biostatic product that incorporates antioxidant, antifoam, anti-rust, humectants and extreme pressure materials, which extend useful life of the tooling, making it ideal for use in stamping, grinding, cutting, drilling operations, milling, sharpening, roughing, and CNC operations.
Evaporative lubricants with faster evaporation rates than previous ones and that leave a much smaller number of residues over treated parts. These two lubricants are useful for use over aluminum, copper, bronze, galvanized metal sheets, etc.
Special evaporative for in-line processes where maximum evaporation rate and minimum of residues amount is required because parts are packed as soon as they are processed and finished. Its application forms are like those other lubricants in this series and can also be used over same materials.
