-
Strongly acidic product, used to remove typical scale from boilers, pipes, cooling towers, etc. such as rust and other minerals deposits. -
It’s a powerful acidic liquid material, which can be diluted in water up to a 1: 4 ratio, and which exerts a powerful cleaning action that allows a really effective maintenance to air conditioning equipment freeing the heat exchangers in these equipment, from all dirt and grime. At higher dilutions (1: 25-30) can be used to clean stainless steel and aluminum finishes. -
Cleaning and metal polishing cream, formulated with micro-abrasive substances, forming a paste in an aqueous medium, which results in a gel of low consistency in such a way that controlled abrasive properties are achieved. Does not include silicone oils. -
Auxiliary paste for removal of oxides, micro slag particles, discolorations and contaminants, over stainless-steel surfaces of all series, nickel, and nickel-copper alloys. Its consistency allows it to be applied to any vertical surfaces and then can be easily removed with pressurized water. Does not contain chlorides, sulfuric acid or abrasives. -
Solution formulated to eliminate all types of dirt and scale formed between diffusers and heat exchangers of evaporators in air conditioning equipment. It is an acidic solution, which, unlike many products on market for same type of cleaning, does not contain aggressive mineral acids such hydrochloric, hydrofluoric or sulfuric acid and which, in its perfect balance, acts effectively on undesirable materials in equipment, without any affectation to other parts in the equipment. Metallic components in grill or curtain of evaporator are inert to cleaning action of PANEL KLINN descaler. -
Liquid consisting of a mixture of fatty amines that act as inhibitors of corrosion and acid attack. When added to hydrochloric, sulfuric or phosphoric acids in cleaning operations, in addition to inhibiting attack over these metals, removes salts and oxides that are embedded in treated surfaces, so that when dissolving salts and oxides, does not cause any attack over metallic parts in contact with these acidic solutions. -
One of main problems with painting galvanized steel is the ease with which paint layers peel off. That is why, if you want paint coating on these surfaces to be durable, it is essential to pre-treat galvanized surfaces to be coated. PREPAINT is the ideal treatment for preparing carbon steel, galvanized steel, and zinc pieces to receive a paint coating, additionally, this product is capable to remove oxides, oils, and light greases from surfaces to be treated. -
Inorganic and water-based oxidation inhibitor. This product has been formulated as part of pre-treatment of all types of ferrous surfaces. Its corrosion protection extends for short periods (5 -25 days), depending on working, application, and storage conditions. Provides antioxidant protection, thanks to formation of a light layer of iron phosphate crystals. -
Product used as an auxiliary material in production of turned or machined metal parts, which will be stored for long periods and which is a true anticorrosive treatment for them. SANOX-E protects ferrous metal surfaces against oxidation and corrosion caused by moisture and aggressive vapors present in environment. -
Corrosion inhibitor to be used on parts not directly exposed to exterior ambient. Protects for weeks, if it is not in direct contact with water, since it is a soluble product in it. Treated parts should always be stored indoors. -
Viscous liquid used in removal of oxides, micro slag, discolorations, and contaminants over stainless steel surfaces. Apply directly to dirt or stain to be removed. Given its viscosity, it can easily be applied to vertical surfaces and its removal is carried out with pressurized water. -
Formulated to eliminate all kinds of dirt or tartar deposits in the different parts that are in direct contact with water in ice-making machines, located in hotels, self-service stores, restaurants, hospitals and other places that make use of this equipment. Importance of its good cleaning and disinfection lies in fact that ice, which it served to clients or patients, must be treated, and handled like any other food product. -
Liquid, epoxic material, used as filler for crack and expansion joints. Can be mixed with mineral fillers to increase its volume and resistance. Maintains enough plasticity, to allow expansion joints continue functioning properly. -
Epoxy Liquid for coating floors, indicated for areas subject to heavy loads and impacts, produced by traffic and heavy machinery operation. Useful when it is required to improve safety, cleaning, and sanitation characteristics, and reduce maintenance costs in factories, mechanical workshops, food processors, warehouses, chemical and pharmaceutical laboratories, loading and unloading areas, parking lots, etc. Slightly yellowish finish. -
Aromatic polyurethane coating, which can be used over concrete, metals, woods, and other materials. High hardness, high gloss and remarkably high resistance to abrasion and numerous chemical products. Supports mixture with dyes specially designed for it. For use indoors, as sunlight produces yellowing in material, when is exposed repeatedly to this. -
Special urethane product, to prime surfaces that will later be coated with urethane, acrylic or epoxy sealers. Provides great adhesion to sealers and finishes. -
Pigmented pastes that, added to sealing materials based on urethane or epoxy resins, produce a huge range of fine and colorful finishes. -
Colorless and crystalline aromatic urethane coating for concrete, metal, and wood floors. Mixed with pigmented pastes, produces shiny, durable, and attractive finishes. For indoor use, preferably. -
Aliphatic urethane coating, recommended for outdoors, since, together with its great resistance and brightness, it shows great stability against action of sunlight, so it does not present problems of degradation, staining or yellowing. Can be easily mixed with pigmented pastes for many bright and colorful finishes. -
Cleaning and polishing paste for stainless steel. Incorporates humectants, surfactants and fine abrasives that give its great cleaning capacity and easy application. -
Corrosion inhibitor, formulated with a water-based resin, which serves to protect metal parts made of iron, stainless steel, galvanized materials, copper and aluminum, by forming a hard and impenetrable layer that provides long-term corrosion protection during indoors and outdoors storage. -
Acid material that allows an effective cleaning of aluminum and its alloys. Quickly removes - preferably by immersion - oxide deposits and other dirt. Effective and economic product. -
Cleaning liquid for air conditioners and refrigeration evaporators. This product turns out to be an effective, simple and fast method to give preventive maintenance to these equipment, since, once applied on them, will only be necessary restart cooling system, and all present contamination will be carried away with and by condensate. -
It is a coolant for plasma torch, consisting of a low-viscosity, non-combustible, biodegradable liquid that constitutes an integral cooling system for use in all circulation systems for plasma torches or blowtorches. -
Degreasing and phosphatizing product, two in one. Phosphating solution for three-stage systems, which avoids additional use of degreasers since cleans and phosphates in a single operation. can be used in immersion or sprinkled process.
Degreasing and multi-metal phosphatizing solution for three-stage processes that, in addition to being able to be applied over ferrous surfaces, can also be used over other materials, such as aluminum or galvanized steel.
Zinc phosphate solution that, during metal treatment prior to painting process, deposits a mixture of iron and zinc phosphates that serve as corrosion protection and as an anchor for paints and protective oils.
Evaporative lubricant, similar to LD-12, to which, in adition, new additives have been incorporated to significantly increse its lubricity, when this factor is decisive for demanding or difficult machining.
Versatile and highly penetrating product used to unlock parts bonded by oxidation or corrosion. In addition to releasing them, it protects them from further oxidation. It can be used as a multiple purposes lubricating agent. Presentations in plastic containers and aerosols.
All-purpose cleaning and degreasing foam.
Cleaning foam for shiny metals and plastics.
